Our chilled water coils are available in same or opposite end designs with a wide choice of tube, fin and material options along with a multitude of circuitry available. All coils are constructed with plate fins and seamless tube construction.

Fins

Secondary surface (fins) shall be of the plate-fin design using aluminum or copper, with die-formed collars. Fin design to be flat, waffle, or sine-wave in a staggered tube pattern to meet performance requirements. Collars will hold fin spacing at specified density, and cover the entire tube surface. Fins are to be free of oils and oxidation.

Casing

Coil casing material shall be galvanized steel at a 16 gauge minimum. Heavier material, stainless steel, copper or aluminum casings are available as required.

Intermediate supports are required every 50” of finned length and shall be bolted to top and bottom casing channels. Coil casings on top and bottom of coils are to have double-flange construction, allowing for vertical stacking of coils.

Tubes

Seamless copper tubes shall be mechanically expanded into plate aluminum or copper fins to form an everlasting bond between primary and secondary surfaces. Tubes are to be mechanically expanded into fins (secondary surface) for maximum heat transfer.

Pressure Testing

Coils shall be tested at 550 psig using dry nitrogen, submerged under water. Dual-operator verification shall determine that all coils are leak-free.

Fluid coils are guaranteed up to a maximum 250° F operating temp, and 300 psig maximum operating pressure

Connections

Connection is to be sweat type (SWT), MPT or FPT grooved or flanged as required.

Headers

Headers (manifolds), if required, shall be constructed of a minimum .060” wall seamless copper. Die-formed copper end caps are brazed on the inside of the headers, and rounded so as to prevent excessive pressure drop. (Unless spun-closed — for sizes up to 1-3/8”) All coils shall be provided with 1/4” vents and drains.

Materials and Specifications

Tube O.D.
3/8"
1/2"
5/8"
Tube Thick
.014
.016
.020
Fin Thick
.005
.006
.006
Optional Tube
.016 | .022
.025
.025 | .035 | .049
Optional Fin
.006 | .0075
.0075 | .010
.0075 | .010
Fin MaterialAluminumOptional -Copper; Stainless Steel
Casing MaterialGalv. Steel 16 gaugeOptional - Galv. Steel 12, 14, 16 and 18 gauge •
304, 316 Stainless Steel 12, 14, and 16 gauge • 14 Gauge aluminum
Tube MaterialCopperN/A
Connection MaterialCopperN/A
Header Material CopperOptional - Type K Copper

Shipping

The equipment we build is specially made to meet your exact engineering requirements, but we also understand time critical projects require quick turn around. Our expedited production program allows us to offer coil shipments in as little as 10, 5, 3 and 1 working days guaranteed.

20 Business Days
Standard Shipment
10 Business Days
Added Premium
5 Business Days
Added Premium
3, 2, & 1 Business Days
Call for Pricing & Availability

IOM

We strive to provide the most stress-free and easy to complete process in the industry. With every purchase, we provide a product-specific Installation, Operation, and Maintenance manual to help guide you through a lifetime of easy operation. Should you have any questions about your product you can contact us for further assistance.

SPECS

Want to know more? Here is the full product spec sheet that lays out product-specific details that can make a difference when it comes to your system performance and longevity. If you're not seeing exactly what you need, you can reach out to one of our highly trained sales engineers and we will take it from there!

DRAWING

Not sure exactly what you need or how to ask for it? Fill out this easy to use step by step guide, that when completed will provide all the necessary information to our highly trained sales engineers. Not sure how to find the information needed in the drawing? Check out our how-to videos on coil measuring and drawing completion!